Electrical Connections - Kichler 330161 Manual De Instrucciones

ELECTRICAL CONNECTIONS

WARNING: To avoid possible electrical shock, be sure you have
turned off the power at the main circuit panel.
Outlet box
in the ceiling
Follow the steps below to connect the fan to your household wiring.
Use the wire connecting nuts supplied with your fan. Secure the
connector with electrical tape. Make sure there are no loose wire
stands or connections.
Black
Green or Bare
Step 1. Connect the fan supply (black) wire and light supply (blue)
White
Black Green
Blue
wire to the black household supply wire as shown in Figure 11.
Step 2. Connect the neutral fan (white) wire to the neutral
Ground to
household (white) wire.
mounting bracket
or downrod
Step 3. Connect the fan ground wire (green) to the household
ground wire.
Step 4. After connecting the wires, spread them apart so that the
green and white wires are on one side of the outlet box and black
wires are on the other side.
Step 5. Turn the connecting nuts upward and push the wiring into
the outlet box.
Fig. 11
12
| KICHLER.COM