Disposal; Updates In Image Acquisition Software; Safety Guide; System Basics - Kulzer i600 Manual De Instrucciones

4.3 Disposal

CAUTION
▪...... ... T he scanner tip must be sterilized before disposal. Sterilize the
tip as described in section 4.2.1.
▪...... ... D ispose of the scanner tip as you would any other clinical
waste.
▪...... ... O ther components are designed to conform with the following
directives:
▪...... ... ... R oHS, Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment. (2011/65/EU)
▪...... ... W EEE, Waste Electrical and Electronic Equipment Directive.
(2012/19/EU)

4.4 Updates in Image Acquisition Software

The image acquisition software automatically checks for updates
when the software is in operation.
If a new version of the software is released, the system will automatically
download it.

5 Safety Guide

Please adhere to all the safety procedures as detailed in this user
guide to prevent human injury and equipment damage. This
document uses the words WARNING and CAUTION when highlighting
precautionary messages.
14 User Manual
Carefully read and understand the guidelines, including all
precautionary messages as prefaced by the words WARNING and
CAUTION. To avoid bodily injury or equipment damage, make sure to
adhere strictly to the safety guidelines. All instructions and precautions
as specified in the Safety Guide must be observed to ensure proper
functionality of the system and personal safety.
The i600 system should only be operated by dental professionals and
technicians who are trained to use the system. Using the i600 system for
any purpose other than its intended usage as outlined in section "2.1
Intended Use" may result in injury or damage to the equipment. Please
handle the i600 system according to the guidelines in the safety guide.

5.1 System Basics

CAUTION
▪...... ... T he USB 3.0 cable connected to the Power Hub is the same as
a standard USB cable connector. However, the device may not
operate normally if a standard 3.0 USB cable is used with i600.
▪...... ... T he connector provided with the Power Hub is designed
specifically for the i600 and should not be used with any other
device.
▪...... ... I f the product has been stored in a cold environment, give it time
to adjust to the temperature of the environment before use. If used
immediately, condensation may occur which may damage the
electronic parts inside the unit.
▪...... ... E nsure that all components provided are free from physical
damage. Safety cannot be guaranteed if there is any physical