Kohler K-528-K1 Instrucciones De Instalación página 16

Symptoms
10. Hot water only, the
valve shuts down.
11. The interface icons are
flashing a communication
error.
1145587-2-E
Probable Cause
A. Hot and cold lines are
reversed.
A. Interface cable connections
may be loose.
B. The interface cable or coupler
is damaged.
C. If none of the recommended
actions for the above issues
correct the symptom, the valve
requires servicing.
Recommended Action
A. Switch hot and cold water supply connections.
Verify that the hot water supply is connected to the
"Hot" inlet and the cold water supply is connected
to the "Cold" inlet.
A. Check all interface cable connections, connect if
needed.
B. Replace the cables or coupler.
C. Contact your Kohler Co. Authorized Service
Representative (ASR).
16 Kohler Co.