Kohler K-528-K1 Instrucciones De Instalación página 9

3. Assemble the Adapters and Unions
Filter (Inlets Only)
O-Ring
Inlet/Outlet Tube
Adapter Lock
Adapter Nut
CAUTION: Risk of product damage. Do not apply excessive heat near the valve. This valve contains plastic and
rubber components that will melt if heat is directly applied.
Disassemble the adapter. Verify that all rubber and plastic components are removed.
Slide the union nut onto the inlet/outlet tube.
Solder the inlet/outlet tube to the union. Allow to cool completely.
Assemble the union.
Slide the adapter nut onto the inlet/outlet tube.
Assemble the adapter lock onto the inlet/outlet tube and slide the assembly into the adapter nut.
Slide the O-ring onto the inlet/outlet tube.
For inlet tubes only: Insert the filter into the end of the inlet tube.
Reinstall the adapter assembly to the valve.
Repeat for all inlet/outlet tubes as required.
Kohler Co.
Solder this
connection.
1/2" Union
9
1145587-2-E