Kohler K-528-K1 Instrucciones De Instalación página 7

1. Plan the Component Locations
Outlets
Supply Inlets
IMPORTANT! When routing piping, the number marked at each valve outlet must correspond to the appropriate shower
fitting for preprogrammed or custom showering experiences to function properly. Refer to the Homeowners Guide for
more information.
NOTICE: If the valve will be used for a bath/shower application, the bath fill supply line must be routed from the #1
outlet port.
NOTE: Only one digital interface is required inside the showering space. A second digital interface or ON/OFF remote
can be installed outside of the shower area.
NOTE: Your digital interface may appear different than the one illustrated, however, the installation procedure for the
valve remains the same. For the digital interface installation, follow the instructions packed with the digital interface.
Determine the locations of all required components before beginning installation.
Kohler Co.
Prompt
Interface
Mode
Interface
7
Interface (or optional
ON/OFF switch)
Coupler
20' (6.1 m) Cables
Adapter Cable
ON/OFF Switch
Coupler
(optional)
Drip Loop
20' (6.1 m) Cable
30' (9.1 m) Cable
Drip Loop
1145587-2-E