Descargar Imprimir esta página

Troubleshooting - Kichler 56 Salvo Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

Problem
Problem
Solution
Solution
Fan will not start.
Fan will not start.
1. Check circuit fuses or breakers.
1. Check circuit fuses or breakers.
2. Check all electrical connections to ensure proper contact.
2. Check all electrical connections to ensure proper contact. CAUTION: Make sure the main power is OFF when checking
any electrical connection.
any electrical connection.
3. Make sure the transmitter batteries are installed properly. Positive (+) side facing out.
3. Make sure the transmitter batteries are installed properly. Positive (+) side facing out.
4. Ensure the batteries have a good charge.
4. Ensure the batteries have a good charge.
Fan sounds noisy.
Fan sounds noisy.
1. Make sure all motor housing screws are snug.
1. Make sure all motor housing screws are snug.
2. Make sure the screws that attach the fan blade brackets to the motor are tight.
2. Make sure the screws that attach the fan blade brackets to the motor are tight.
3. Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing.
3. Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing.
CAUTION: Make sure main power is off.
CAUTION: Make sure main power is off.
4. Allow a 24-hour "breaking-in" period. Most noise associated with a new fan disappears during this time.
4. Allow a 24-hour "breaking-in" period. Most noise associated with a new fan disappears during this time.
5. If using an optional light kit, make sure the screws securing the glassware are tight. Make sure the light bulbs are not
5. If using an optional light kit, make sure the screws securing the glassware are tight. Make sure the light bulbs are not
touching any other component.
touching any other component.
6. Do not connect this fan to a wall mounted variable speed control(s). They are not compatible with ceiling fan motors or
6. Do not connect this fan to a wall mounted variable speed control(s). They are not compatible with ceiling fan motors or
remote controls.
remote controls.
7. Make sure the upper canopy has a short distance from the ceiling. It should not touch the ceiling.
7. Make sure the upper canopy has a short distance from the ceiling. It should not touch the ceiling.
Fan wobble.
Fan wobble.
1. Check that all blade and blade arm screws are secure.
1. Check that all blade and blade arm screws are secure.
2. Most fan wobbling problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling
2. Most fan wobbling problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling
above the tip of one of the blades. Measure this distance. Rotate the fan until the next blade is positioned for measurement.
above the tip of one of the blades. Measure this distance. Rotate the fan until the next blade is positioned for measurement.
Repeat for each blade. The distance deviation should be equal within 1/8".
Repeat for each blade. The distance deviation should be equal within 1/8".
3. If the blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and
3. If the blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and
possibly result in smoother operation.
possibly result in smoother operation.
Remote control
Remote control
1.Ceiling Fans with remote control systems CAN NOT be operated in conjunction with any other control system EXCEPT a
1.Ceiling Fans with remote control systems CAN NOT be operated in conjunction with any other control system EXCEPT a
malfunction.
malfunction.
basic On/off wall switch, if desired.
basic On/off wall switch, if desired.
20 | KICHLER.COM
CAUTION: Make sure the main power is OFF when checking

Publicidad

loading

Este manual también es adecuado para:

330045