Installing The Light Plate - Kichler 56 Salvo Manual De Instrucciones

INSTALLING THE LIGHT PLATE

Step 1. Remove the screw marked with a brown dot label on the mounting
plate and keep for later use. Loosen the other two screws (do not remove).
(Fig.19)
Mounting Plate
Screw
Step 2. Place the two slot holes on the light plate over the 2 screws previously
loosened from the mounting plate. Rotate the light plate until it locks in place
at the narrow end of the key holes. Securely tighten the 2 screws previously
loosened and the one previously removed. (Fig. 20)
Fig. 19
Light Plate
Fig. 20
14 | KICHLER.COM