Publicidad
Idiomas disponibles
Idiomas disponibles
Airfusion BALI Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts supplied
with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or
connections.
Fig. 13
10. Pull the metal safety cable on the security hook, tight the safety cable. (Fig. 14)
8 | P a g e
ELECTRICAL WIRING DIAGRAM
Connect the household live supply wire (black) to
1.
receiver input wire (black, AC IN L) as shown in
2. Connect the household neutral supply wire (white) to
the receiver input wire (white, AC IN N).
3. Connect the household ground wire to the fan
ground wires (green) from motor, downrod, fan
mounting bracket, and recevier ground wires together.
Connect all ground wires together using the twist
connector.
4. Connect the reveiver output wire (white, for light N)
to motor input wire (White, To Light N).
5. Connect the reveiver output wire (Blue, for light L) to
motor input wire (Blue, To Light L).
6. Connect the reveiver output wire (Pink, to motor U)
to motor input wire (Brown, To motor U).
7. Connect the reveiver output wire (Gray, to motor V)
to motor input wire (Yellow, To motor V).
8. Connect the reveiver output wire (Red, to motor W)
to motor input wire (Red, To motor W).
(Fig. 13)
Fig. 14
Publicidad
