Publicidad
Idiomas disponibles
Idiomas disponibles
Airfusion BALI Installation Instructions
11. Turn the connecting nuts upward and push the wiring into the outlet box.
12. Carefully insert the Remote Receiver above the hanger ball in the remainder spacing in the mounting
bracket. Take care not to damage or loosen any of the wiring. (Fig. 15)
INSTALLATION OF THE CANOPY (Fig. 16)
•
Loosen the 2 screws at the bottom of the mouthing bracket.
•
Slide the canopy up to the mounting bracket and align the key holes on the canopy with the screws on the
mounting bracket. Turn the canopy until it locks into place with the narrow section of the key holes and
secure it by tightening the two screws. Avoid damaging the electrical wiring prepared previously.
9 | P a g e
FINISHING THE INSTALLATION
Fig. 12a
Fig. 16
Fig. 15
Publicidad
