Operation Modes - Erreka VIVO-D103 Manual Del Instalador

3

OPERATION MODES

Automatic mode (DIP1 ON)
Semi-automatic mode (DIP1 OFF and DIP2 ON)
DESCRIPTION OF THE PRODUCT
Opening: this begins by operating the key device
(magnetic key, key selector, remote control, etc).
• Opening with Alternative Halt (DIP2 ON):
if the control device is operated during
opening, the gate halts and will remain open
for the programmed time. If the control device
is operated again, the gate will not close until
stand-by time has passed.
• Community opening (DIP2 OFF): during
opening, the control panel does not obey
control orders (the gate cannot be halted using
control devices).
Standby: the gate remains open during the
programmed time.
Close: the closing operation starts once stand-by
time is finished.

If, during closing, the control device is
operated, the gate inverts the operation
direction and it opens completely.
Opening (with Alternative Halt): this begins by
operating the key device (magnetic key, key
selector, remote control, etc).
If a key device is activated during opening, the
gate comes to a halt. If the control device is
operated again, the gate closes (provided the
safety items so allow).
Standby: the gate remains open indefinitely until
the key device is operated.
Close: the closing operation starts when the key
device is operated.

If, during closing, the key device is operated,
the gate inverts the operation direction and it
opens completely.
VIVO-D103 / ADB30 Control Panel
41