Descargar Imprimir esta página

Levolor Sheer Shadings Manual De Instalación página 22

Ocultar thumbs Ver también para Sheer Shadings:

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION
Headrail End Marks
Space Evenly
5"
Window Opening
• Center the installation brackets or extension brackets on your marks and mark
where to drill the screw holes.
— A minimum 1
1
/
" flat vertical surface is required for the installation brackets and
8
extension brackets require 1
1
/
".
4
— The tops of the installation brackets or extension brackets should be at the
desired height. The brackets should be level and aligned.
IMPORTANT: The rear of the brackets must be flush against a flat mounting
surface. Do NOT mount brackets on curved molding.
1
/
"
1
8
• Drill the screw holes using a
3
/
" drill bit.
32
IMPORTANT: Use drywall anchors when mounting into drywall.
• Attach the installation or extension brackets
using the screws provided.
IMPORTANT: The tops of the
installation brackets or extension
brackets must be level with
their front edges aligned.
8
Sheer Shadings Motorized Operating System
Space Evenly
5"
Motor
Side
Extension
1
/
"
1
4
Bracket
• If using spacer block(s): stack spacer block(s)
on the backside of the installation brackets.
Using #6 Hex Head Screws (not provided), which
are long enough to provide secure installation,
install screws through the installation bracket and
spacer block(s) into mounting surface.
IMPORTANT: Do not add more than 1½"
of clearance using spacer blocks.
IMPORTANT: The tops of the installation
brackets must be level with the front
edges aligned.
IMPORTANT: Use drywall anchors when
mounting into drywall.
• If using extension brackets, attach an installation
bracket to the underside of each extension bracket
using the speed nut and screw provided.
SIDE MOUNT
Prepare the Installation Brackets
Side mount the headrail when conventional mounting techniques will not work –for
example, in an arched window opening.
• Mount the extension brackets on a surface at least 1 ¼" wide.
• Attach the installation brackets to the extension
brackets using the provided screws and speed nuts.
IMPORTANT: When securing side mounted shadings into
a surface other than a secure wall stud, use medium to
heavy-duty wall anchors (not provided). Match anchors to
the wall thickness. Failure to mount the brackets securely
may result in injury or property damage.
NOTE: Spacer blocks cannot be used with side mount
installations.
INSTALLATION
Spacer
Blocks
Speed Nut
Extension
Bracket
Screw
Extension
Bracket
Sheer Shadings Motorized Operating System
Longer
Screw
1
1
/
"
4
Minimum
Depth
9

Publicidad

loading