Operating Mode - Levolor Sheer Shadings Manual De Instalación

Programming

Operating Mode

This procedure will set the operating mode on all blinds
and shades assigned to a specific channel.
All blind and shade motors can be set to two different
operating modes.
Continuous Mode (Default setting)
Recommended for cellular, natural, roller, and
roman shades.
Motor continues to move after a short press of the   up or
  down arrow buttons until the   stop button is pressed
or until the limit is reached.
Press and hold (about 5 seconds) the   up and  
1
down buttons simultaneously until the motor jogs x 1.
Press and hold (about 2 seconds) the   stop button
2
until the motor jogs x 2 and/or beeps x 3.
Intermittent Mode
Recommended for banded shades, sheer shades, and
wood blinds.
Motor moves a small amount after a short press of the
  up or   down buttons and continues to move after a
long press of the   up or   down buttons until the   stop
button is pressed or the limit is reached.
Press and hold (about 5 seconds) the   up and  
1
down buttons simultaneously until the motor jogs x 1.
Press and hold (about 2 seconds) the   stop button
2
until the motor jogs x 1 and/or beeps x 1.
Remote Control Guide
10
Home