Wood Blinds - Levolor Sheer Shadings Manual De Instalación

Product Overview

Wood Blinds

Programming
Programming button is located inside the headrail on the
left corner of the motor and a paperclip or similar tool
must be used to activate.
The programming button is not accessible when mounted.
Programming button acts as a manual control and the
blind will move when the button is activated.
During setup, the blind will confirm programming by
jogging, with a slight down and up movement.
Charging
The rechargeable battery mounts between the headrail and
valance. Indicator light and charging port are located on the
bottom of the battery. Magnetic charging insert comes installed
in battery. For easy charging, attach the magnetic charging
adapter to the micro-USB charging cable and power adapter
before connecting to the battery to charge. For standard
charging, remove the magnetic charging insert from the battery
and use the micro-USB charging cable and power adapter.
Indicator light turns red when battery is low. During charging,
the light will turn green when fully charged.
NOTE: Before installation, fully charge battery.
Magnetic Charging
Indicator
Light
Magnetic
Charging
Insert
Valance omitted for clarity
Remote Control Guide
Magnetic
Charging Adapter
Standard Charging
Indicator
Light
Valance omitted for clarity
3
Micro-USB
Charging Cable
Home