Motor Speed - Levolor Sheer Shadings Manual De Instalación

Programming

Motor Speed

This procedure will set the motor speed on all blinds and
shades assigned to a channel.
All motors have 3 speeds available and are set to the
slowest speed by default.
Set to Faster Speed
Press one P2 button in the battery compartment of
1
the remote until motor jogs x 1 and/or beeps x 1.
Press the   up button until the motor jogs x 1 and/or
2
beeps x 1.
Press the   up button again until the motor
3
jogs x 2 and/or beeps x 1.
Set to Slower Speed
Press one P2 button in the battery compartment of
1
the remote until motor jogs x 1 and/or beeps x 1.
Press the   down button until the motor jogs x 1
2
and/or beeps x 1.
Press the   down button again until the motor
3
jogs x 2 and/or beeps x 1.
NOTE: If the motor has no response, it is already on the fastest
or slowest speed.
Remote Control Guide
11
Home