Wall Holder - Levolor Sheer Shadings Manual De Instalación

Remote Overview

Wall Holder

Provide a home for LEVOLOR remotes with the
remote holder.
Tools Needed to Mount Remote Holder
• Power drill
• 3⁄32" drill bit
• Phillips screwdriver
• Pencil
Remote Holder Mounting Instructions
Choose location and mark wall plate placement.
1
If you are mounting onto wood, use a 3⁄32" drill bit
2
to drill pilot hole. If you are mounting onto drywall,
use the included drywall anchor.
Attach the wall plate to the wall using the screw
3
provided; ensure the curved edge is on top.
Slide mounting disc over wall plate and snap
4
into place.
Place remote on mounting disc and gently slide
5
downward to seat remote onto holder.
Slide remote upward to remove from holder.
6
Remote Control Guide
Mounting
Disc (Install Curved
Edge to Top)
7
Mounting
Surface
Wall Plate
Home