Banded, Roller And Sheer Shades - Levolor Sheer Shadings Manual De Instalación

Product Overview

Banded, Roller and Sheer Shades

Programming
Programming button, charging port, and indicator light
are located on the right-side of the shade headrail.
Programming button acts as a manual control and the
shade will move when the button is pressed.
During setup, the shade will confirm programming by
beeping and jogging, with a slight down and up movement.
Charging
Magnetic charging insert comes installed in shade. For easy
charging, attach the magnetic charging adapter to the
micro-USB charging cable and power adapter before
connecting to the headrail to charge. For standard
charging, remove the magnetic charging insert from
the headrail and use the micro-USB charging cable and
power adapter.
Indicator light will flash red when battery is low, flash green
during charging, and remain green when fully charged.
Shade will also beep 10 times when in use to indicate a
low battery.
NOTE: Before installation, fully charge shade.
Magnetic Charging
Magnetic Charging Adapter
Remote Control Guide
Magnetic
Charging Insert
Programming Button
Indicator Light
Micro-USB Charging Port
Standard Charging
2
Micro-USB
Charging Cable
Home