Easy Tune Mode (Mma) - Sweiss SKYMAX 2040 Nx Manual De Usuario

SCREEN INTERFACE
IMPORTANT: TO CHANGE IN MMA AND MIG FROM EASY TUNE MODE TO PRO TUNE MODE, AND FROM
SIMPLE TIG TO PULSE MODE, IT IS NECESSARY TO ENTER THE HIDDEN MENU. FOLLOW THE
INSTRUCTIONS DESCRIBED IN EACH PROCESS.

5. EASY TUNE MODE (MMA)

In its factory con guration the equipment is in EASY TUNE MODE for MMA.
PRO EASY
TUNE TUNE
8.8.8 H
1
AMP
M/Min
A1
8.8.8
START PEAK
FREE BASE
PROGRAM VOLTS
PRO EASY
TUNE TUNE
H
8.8.8 1
AMP
M/Min
A1
8.8.8
START PEAK
BASE
FREE
PROGRAM VOLTS
PRO EASY
TUNE TUNE
H
8.1.0 1
AMP
M/Min
A1
START PEAK
FREE BASE
PROGRAM VOLTS
14 SWEISSWELD.COM
Press the MODE button to switch
between MMA, TIG, MIG. The
selected process will light up in the
lower bulb of the selected process.
Press the MODE button to switch to
MMA, the MMA LED will illuminate
and the easy Tune LED will activate.
After selecting the MMA process you
can increase the amperage by
turning the knob to the right or
decrease it by turning it to the left in
a range from 10 to 130A (110V) or 10
to 200A (220V).
Note: in EASY TUNE mode you can
only adjust the amperage.
PRO EASY
TUNE TUNE
H
1.3.0 1
AMP
M/Min
A1
8.8.8
START PEAK
FREE BASE
VOLTS
PROGRAM