7. EASY TUNE MODE (MIG)
In its factory con guration, the equipment is in EASY TUNE MODE for MIG. In this mode, the equipment
will work in Synergic MIG, that is, it will automatically adjust the parameters to the material and gas that
are selected with the adjusted program.
PRO
EASY
TUNE
TUNE
H
8.8.8
1
AMP
M/Min
A1
8.8.8
START
PEAK
BASE
FREE
VOLTS
PROGRAM
PRO
EASY
TUNE
TUNE
H
1
AMP
M/Min
A1
ROD
START
PEAK
FREE
THICKNESS
BASE
PROGRAM
ELECTRODE D
VOLTS
Press the MODE button to switch to
MIG, the MIG LED will illuminate
and the easy Tune LED will activate.
1. After selecting the MIG process,
PRO
EASY
TUNE
TUNE
you can increase the amperage by
H
1
turning the knob to the right or
AMP
M/Min
A1
decrease it by turning it to the left in
START
PEAK
FREE
BASE
a range from 60 to 170 A. The voltage
VOLTS
PROGRAM
value will be automatically adjusted
according to the synergic curve of
the selected program ( see next page
for program selection).
VOLTS
2. After setting the amperage, press the knob to
go to VOLTS, with which you can modify the
voltage deviation of the synergic curve in a
range from -4.0 to 4.0 V.
22
SWEISSWELD.COM
PRO
EASY
TUNE
TUNE
H
1
AMP
M/Min
A1
8.8.8
START
PEAK
FREE
BASE
VOLTS
PROGRAM