Sweiss SKYMAX 2040 Nx Manual De Usuario página 71

PRO EASY
TUNE TUNE
H 1
AMP
M/Min
A1
START PEAK
BASE
FREE
VOLTS
PROGRAM
7.1 PRO TUNE MIG SELECTION
PRO EASY
TUNE TUNE
START
FREE
PROGRAM
PROGRAM
H
1
AMP
M/Min
A1
PEAK
BASE
VOLTS
23 SWEISSWELD.COM
3. In the program you will nd from one to 12
con gured combinations depending on the
type of wire, the diameter and the amount of
Carbon Dioxide and Argon or the absence of
these, according to the selected programming.
PROGRAM WIRE DIAMETER
P1 Fe
P2 Fe
P3 Fe
P4 Fe
P5 Fe
P6 Fe
P7 Flu.Fe
P8 Flu.Fe
P9 Flu.Fe
P10 AlMg
P11 AlMg
P12
AlMg
This table is located on the top of
the machine.
1. To change from Easy Tune to Pro Tune press the
mode selection button and the knob for a few
seconds until the following gure is completed on
the lower and upper panels:
Entering the HIDDEN MENU until the word PAS
(password) appears on the upper screen.
GAS
0.8 80%Ar 20%CO2
0.9 80%Ar 20%CO2
1.0 80%Ar 20%CO2
0.8 100%CO2
0.9 100%CO2
1.0 100%CO2
0.8 Gasless
0.9 Gasless
1.0 Gasless
0.8 100%Ar
0.9 100%Ar
1.0 100%Ar