Sweiss SKYMAX 2040 Nx Manual De Usuario página 69

6.3 PRO TUNE TIG SETTINGS
PRO EASY
TUNE TUNE
H
1
AMP
M/Min
A1
START PEAK
FREE BASE
PROGRAM VOLTS
PRO EASY
TUNE TUNE
H 1
AMP
M/Min
A1
PEAK
START
FREE BASE
VOLTS
PROGRAM
PRO EASY
TUNE TUNE
H 1
AMP
M/Min
A1
PEAK
START
BASE
FREE
VOLTS
PROGRAM
START
2. One of the parameters that we can modify is
START (start current), which can be set from 0 to
130 A at 110V and from 10 to 200 A at 220V.
FREE
3. Press the center knob until the FREE LED
lights up to select the pulsed tig mode
frequency setting, adjustable from 0 to 250Hz.
Adjust the frequency value by turning the knob,
leave the value at 0 to disable the pulsed mode.
4. The THICKNESS (base) parameter indicates
BASE
the pulse base current. The output current will
oscillate between this base value and the work
current value at the frequency set in the
previous step. If the frequency is set to 0, the
pulse will be disabled and it will not be possible
to adjust the base current value.
21 SWEISSWELD.COM