Sweiss SKYMAX 2040 Nx Manual De Usuario página 68

PRO EASY
TUNE TUNE
START
FREE
PROGRAM
6.2 MODO PRO TUNE TIG
PRO EASY
TUNE TUNE
H 1
AMP
M/Min
A1
START PEAK
BASE
FREE
VOLTS
PROGRAM
H
1
AMP
M/Min
A1
PEAK
BASE
VOLTS
PEAK
20 SWEISSWELD.COM
6. To change from Eas (Easy Tune) to Pro (Pro Tune)
press the knob and the surrounding LEDs will
illuminate, turning the knob to the left or right you
can go from Easy to Pro and con rm by pressing the
knob again.
At the top, the LEDs will light up depending on the
mode you choose EASY or PRO.
7. To exit the HIDDEN MENU press the knob for a few
seconds.
1. Once the PRO TUNE mode for TIG has been
selected you can set the options for TIG on the
lower LED panel and jump from one to another
by pressing the knob, the LED of the property
you want to adjust will light up and you can
turn the knob to set the desired value.