PRO
EASY
TUNE
TUNE
H
1
AMP
M/Min
A1
START
PEAK
FREE
BASE
PROGRAM
VOLTS
PRO
EASY
TUNE
TUNE
H
1
AMP
M/Min
A1
START
PEAK
BASE
FREE
PROGRAM
VOLTS
5.4 CONFIGURACIÓN MMA PULSADO
PRO
EASY
TUNE
TUNE
H
1
AMP
M/Min
A1
PEAK
START
FREE
BASE
VOLTS
PROGRAM
A1
2. After pressing the knob and con rming the
amperage the LED of A1 will be on. This
indicates that we can proceed to change the
ARC FORCE which can be set from 0 to 100 and
then press the knob to con rm.
H
1
2. After pressing the knob and con rming the
arc force the LED will be on. This indicates that
we can proceed to change the HOT START that
can be set from 0 to 50 and then press the knob
to con rm.
1. Press the center knob until the FREE LED lights up to select the pulsed
mma mode frequency setting, adjustable from 0 to 250Hz. Adjust the
frequency value by turning the knob, leave the value at 0 to disable the
pulsed mode.
2. After the pulse pon press the center knob until the BASE LED lights up
to select the pulse base current value. The output current will oscillate
between this base value and the output current value set in the rst step
at the frequency set in the previous step. If the frequency is set to 0,
pulsing will be disabled and it will not be possible to adjust the base
current value.
17
SWEISSWELD.COM
H
1