409001_01 | 12.2020
Intended use
The attachments are designed as interchangeable equipment for
mounting on chainsaws.
Only chainsaws that have been tested by Eder Maschinenbau GmbH
for compatibility with Eder attachments may be used as drive motors.
An
overview
can
produkte/anbaugeraete-fuer-motorsaegen-produkte
The various attachments can be interchanged with each other. You
may only use the chainsaw attachments for the activities described in
these instructions. You must always respect the performance limits
of the device.
The attachments are approved for use in forestry as well as for
private use. It is designed exclusively for operation by one person.
Never allow two or more persons to work on one device.
Intended use also implies that you have read and understood this
manual in its entirety and in particular the chapters "Safety
instructions" and "Design and function".
Improper use
Any use not in accordance with the intended use is not permitted.
The following is considered improper use:
• removing or modifying safety devices,
• using the attachment in any other way than described in the
chapter "Intended use",
• mounting the attachment in any other way than described in the
chapter "Assembly",
• using the attachment under operating conditions that differ from
those described in this manual.
If the device is not used as intended, all warranty claims will become
void.
The manufacturer is not liable for damage to the device and for
personal injury resulting from improper use.
Qualification of the personnel
The attachments for chainsaws may only be mounted, operated,
maintained and repaired by persons who have familiarised
themselves with the device and the associated dangers by means of
these instructions.
Persons who assemble, operate, disassemble or maintain the
attachments must not be under the influence of alcohol, other drugs
or medicines that affect their ability to react, nor must they be tired, ill
or irritable.
be
found
at
www.eder-maschinenbau.de/
Attachments with chain drive
EN
6