Publicidad
Idiomas disponibles
Idiomas disponibles
EN
EDER Curved Planer ERH-C 400700
Design: The ERH-C curved planer is mounted on a bar that matches
the chainsaw and is driven by a chain just like a normal chainsaw.
No modifications are required to the chainsaw.
Field of application: For planing round, flat or curved wood surfaces
up to 30 cm diameter.
The design of the cylinder results in high cutting performance with
minimum effort.
The knives mounted on the rotating cylinder are continuously
adjustable, allowing you to set both the cutting radius and the cutting
depth according to the desired chip thickness.
On the cylinder there are four knives distributed on two levels, which
produce a smooth surface without vibrations.
EDER Contour Planer EKH-C 401900
Design: The EKH-C contour planer is mounted on a bar that
matches the chainsaw and is driven by a chain just like a normal
chainsaw. No modifications are required to the chainsaw.
Field of application: For planing straight and wavy wooden
surfaces, e.g. when building log houses, children's playgrounds,
bonanza fences and similar projects. Well suited for very hard woods
such as robinia wood.
The design of the cylinder results in high cutting performance with
minimum effort.
The adjustable minimum knife projection setting effectively prevents
the log from splitting. As one rotation of the cylinder means only one
cut at working width, the reaction forces are kept to a minimum.
Knots and thin branches are easily and cleanly planed off.
EDER Groove Cutter ENF-C 400800
Design: The ENF-C groove cutter is mounted on a bar that matches
the chainsaw and is driven by a chain just like a normal chainsaw.
No modifications are required to the chainsaw. Up to three knives of
10mm width each can be used to achieve cutting widths up to 30mm.
Field of application: For milling channels and grooves in wood
surfaces, e.g. when building log houses, children's playgrounds,
carving sculptures and in similar projects.
The design of the milling head results in high cutting performance
with minimum effort.
Up to three knife discs can be mounted on the support, producing a
smooth surface without vibration.
409001_01 | 12.2020
Attachments with chain drive
10
Publicidad
