Cleaning; Maintenance - eder ESG-C 400200 Instrucciones De Operación

25 Attachments with chain drive
Fig. 12: Replacing knives

Cleaning

Danger during maintenance, repair and cleaning work with
the drive motor running!
Before carrying out maintenance, repair and cleaning work,
switch off the drive motor and secure the device against being
switched on again.
To work safely, you must clean the device after each use. In case of
heavy use, also during work if necessary.
> Remove all wood debris, chips and other dirt.
> Use a brush to clean the attachments.
> Be sure to keep the air slots on your drive motor clear. While
working, accessories can become slightly sticky due to the
presence of resin and chips.

Maintenance

Danger during maintenance, repair and cleaning work with
the drive motor running!
Before carrying out maintenance, repair and cleaning work,
switch off the drive motor and secure the device against being
switched on again.
Danger from changes to the device!
> Only carry out the maintenance and repair work described in
this manual.
WARNING
WARNING
409001_01 | 12.2020