Publicidad
Idiomas disponibles
Idiomas disponibles
6. Short-press the
button and set the minimum indoor temperature.
7. Short-press the
button and activate (ON)/deactivate (OFF) the indoor minimum temperature
alert.
8. Short-press the
button and set the minimum indoor temperature.
9. Short-press the
button and activate (ON)/deactivate (OFF) the indoor maximum temperature
alert.
When the set temperature limit is exceeded, an audio alarm will sound for 1 minute and the value
will begin flashing.
Pressing any button on the screen cancels the alert sound, but the symbol of an active alert will con-
tinue flashing. Once temperature drops below the set limit, the symbol on the screen will stop flashing.
Temperature, Humidity and Pressure Trends
Rising
Constant
Falling
Moon Phases
1
2
1 – New moon
2 – Waxing crescent
3 – First quarter
4 – Waxing gibbous
Note: In the period between 18:00 and 06:00, the moon icon will be surrounded by stars.
Displaying Maximum and Minimum Readings of Temperature/Humidity and Wind
Repeatedly pressing the
and humidity values and maximum wind strength.
The memory of measured values is automatically erased every day at 00:00.
Or long-press the
button to erase the memory automatically.
Displaying Measured Values from the Precipitation Sensor
Repeatedly pressing the
time periods.
Accumulated
Today
Last hour
Yesterday
This week
Long-pressing the
button erases the measured value.
Station Display Backlight
When powered via adapter:
Permanent backlighting is set automatically.
Repeatedly pressing the SNOOZE/LIGHT button will allow you to set 4 different levels of permanent
backlighting (off, maximum, medium, low).
When powered only by 3× 1.5 V AAA batteries:
Display backlighting is off. Pressing the SNOOZE/LIGHT button will turn the display backlight on for
5 seconds, then it turns off again. When the station is only powered by batteries, permanent back-
lighting of the display cannot be activated!
Note:
The inserted batteries serve as backup for the measured/set data.
If batteries are not inserted and you unplug the adapter, all data will be erased.
3
4
button will gradually show maximum and minimum measured temperature
button will gradually show measured precipitation values in various
8
5
6
5 – Full moon
6 – Waning gibbous
7 – Last quarter
8 – Waning crescent
7
8
Publicidad
