Information For The Operator - Hansgrohe Pontos AquaCycle 900 Instrucciones De Servicio

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Information for the operator

In addition to the safety information, please
observe the following principles:
Permanently label all tapping points for
service water with the notice "no drinking
water". This also applies to garden taps.
If you are using detachable or lockable
twist handles on publicly accessible dis-
charge fittings, these may not be replaced
by an upper part with T-handle. Remove
the twist handle after the fitting has been
used or lock it.
If any changes of the water with regard to
smell, colour and / or suspended solids are
noticed at the tapping points, check the fa-
cility. If necessary, call in an expert.
Do not use any chemicals or additives to
operate and clean the facility.
There may be no connection between the
drinking and service water.
Lock the tapping points and service water
lines that are not frost-protected in due time
before the onset of sudden frost and drain
them.
If there is danger of frost during longer pe-
riods of standstill or in case of outdoor stor-
age, ensure that the facility is completely
drained and that pumps and pipelines are
free of water.
Avoid any static loads (e.g. by appending
objects) on all intake, overflow, draining
and tapping lines.
Details about water savings to be achieved
are approximations and depend on facility
operation.
EN8
Operating instructions AquaCycle 900
050608

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido