8.1. Specifications
Current
Intensity
Timer
2P : 2 pole mid- frequency current :
Carrier wave
AMF frequency
Modulation frequency
Modulation program
4P : Interference classical and isoplanairy
Carrier wave
AMF frequency
Modulation frequency
Modulation program
Bi – asymmetrical biphasic pulsed current (TENS)
Pulse width
Frequency
Modulation frequency
Modulation program
Burst frequency
8.2. Technical specifications
Mains adapter
Type mains adapter
Mains voltage
Frequency
DC Output
Max. Output current
Unit
Medical device classification
Safety class
Patient leakage current
Ditto, first fault condition
Safety tests
Dimensions
Weight
Environment conditions for transport and Storage
Environment temperature
Relative humidity
Atmospheric pressure
Environment conditions normal use
Environment temperature
Relative humidity
Atmospheric pressure
CHAPTER 8 - SPECIFICATIONS
: 0 - 99 mA
: 0 - 60 minutes
: 4 kHz
: 5 - 200 Hz
: 0 - 180 Hz
: 1-1, 6-6, 1-30 seconds
: 4 kHz
: 5 – 200 Hz
: 0 – 180 Hz
: 1-1, 6-6, 1-30 seconds
: 150 µs
: 1 – 200 Hz
: 0 – 180 Hz
: 1-1, 6-6, 1-30 seconds
: 2 Hz
: ENB-1530
: 100 - 240 Volt
: 50/60 Hz.
: 15 Volt
: 2 A
: IIb (according to Medical Device Directive (93/42/EEC)
: II* type BF**, according to IEC 60601-1
: Better than IEC requirement (IEC < 100 µA)
: Better than IEC requirement (IEC: < 500 µA)
: CE-MDD (TÜV Rheinland)
: 22 x 20 x 20 cm (w x d x h)
: 1.8 kg.
: -10° till +70° C
: 10 till 100 %
: 500 till 1060 hPa
: 10° till 40° C
: 10 till 90 %
: 500 till1060 hPa
23