ENGLISH
3.5.7 ROW MARKER DISK ADJUSTMENT
The row marker is a machine that traces a reference line parallel
to the tracks of the tractor on the ground.
Once the tractor has completed its run and it has turned around,
follow the reference row with one of the centre of the tractor (L,
Fig. 70). The row marker arms reverse themselves independently
and this reversal is actuate by the comand of the oildynamic di-
stributors of the tractor. When the system is not in use, protect the
quick coupling with its cap.
ATTENTION
Before operating the hydraulic system of the row marker, apply
light pressure with your hand on the row marker arm in the
direction of the arrow (Fig. 71), unhook the safety devices on
both the arms (A Fig. 71), and then position them as shown in
Figure 72. For travel on the road, lock the row marker arms in
a vertical position with the safety devices (A Fig. 71).
76 - EN
USE AND MAINTENANCE
fi g. 70
fi g. 71
A
fi g. 72
D
L
A
cod. G19503231
C