Machine Whirr; Dismantling And Demolishing The Machine; Inconveniences And Their Remedies - Metcalfe TR 70 Manual De Instrucciones Para Uso Y Manutención

The whirring noise emitted by the machine has been measured on an identical sample
machine in compliance with standard DIN 45635. A constant value not exceeding 70_dB(A)
was measured as stated in the manufacturer's test report.

9. DISMANTLING AND DEMOLISHING THE MACHINE

If machine needs to be dismantled and/or demolished, its components do not entail a
degree of danger that requires any particular precaution.
Remember, however, that to facilitate material recycling operations, it is a good rule to
remove electrical system components from the machine.
INFORMATIVE REPORT TO THE CUSTOMERS
according to the art.13 of Decree Legislative 25 July 2005, n.151 "Performance
Directives 2002/95/CE, 2002/96/CE and 2003/108/CE, relative to the reduction of the use
of dangerous substances in the electronic and electrical equipment, let alone to dispos-
al of the refusals".
EN 50419
The symbol of the crossed bin brought back on the equipment or its packing indicates that the product at
the end of its own life cycle must be collected separately from the other refusals. The differentiated collec-
tion of the present equipment at the end of its life cycle is organized and is managed from the distributor.
The customer who want to unravel itself the present equipment will have therefore to contact the distribu-
tor and follow the system that he has adopted in order to concur the separate collection of the equipment
at the end of its life cycle. The adapted differentiated collection for the successive start of the cast-off
equipment to the recycling, to the treatment and to the compatible with environment disposal contributes
to avoid possible negative effects on the atmosphere and the health and favours the re-employment
and/or the recycling of the materials of which the equipment is made. Illicit disposal of the product by the
holder involves the application of the previewed administrative endorsements from the enforced norm.
INCONVENIENCES
1) Machine operation
failure
2) Problems on the product:
The product gets stuck
when being poured out
The product looks
unacceptable even after
the initial minutes: it
breaks and looses flour
The product does not come • the blocking of the drawplate • disassemble and clean
out from the drawplate

8. MACHINE WHIRR

10. INCONVENIENCES AND THEIR REMEDIES

CAUSES
• disconnected plug
• plug leads not
correctly connected
• trip switch adjusted
for insufficient values
• unsuitable trip switch
• the security hook
on the pool cover is not
inserted properly
• dough too humid is used
• too short kneading time
• too reduced water
percentage
because of dried dough
REMEDIES
• connect plug
• check lead connections
• adjust trip switch
• replace trip switch
• position the hook
• reduce the quantity of
• increase the kneading time
• increase the quantity of
28
accordingly
at the end of the run
water used for the dough
respecting the abovemen-
tioned percentage
water in order to respect
the aforementioned
percentage
the drawplate