KLS Martin group Angulus2 Instrucciones De Uso página 58

11 Technical Data
Components/Conditions
Sheath with shaft
Screwholding device
Turning handle
Tools* (blades and drill)
Chuck system
Used materials
Angled screwdriver, screwholding device
and tools
Turning handle
Environmental Conditions
Transport temperature
Operational temperature
Temperatures on the angled screwdriver
on the operator's side
on the patient's side
Tool
* For tools which are not approved for use in the angled screwdriver by the manufacturer,
the user must choose the correct operating conditions in order to ensure that there is no
risk to the user, the patient or third parties.
58
Characteristics/Values
Coupling: INTRA (ISO 3964)
Input speed: max. 10,000 rpm
Transmission ratio 1.75:1
Torque on tool*: max. 120 Ncm
For screws with max. Ø 2.3 mm
Coupling: INTRA (ISO 3964)
Special chuck system Gebrüder Martin
Ø 2.35 (special chuck system Gebrüder Martin)
Stainless steel
Stainless steel and plastic (PPSU)
-40°C to +70°C (-40°F to 158°F)
at 8–80% (relative) humidity, non-condensing
+10°C to +35°C (+50°F to +95°F)
at 15–80% (relative) humidity, non-condensing
max. +55°C (+131°F)
max. +50°C (+122°F)
max. +41°C (+105.8°F)
Instructions for Use
Angulus2 Angled Screwdriver
Revision 04