Publicidad
Idiomas disponibles
Idiomas disponibles
2. Prepare the food and distribute it on the draining board.
Observe the MAX marking in the unit. If you are preparing
individual food items, distribute them as far as possible with
a little space between them so that the hot air flows evenly around
them. This enables your food to be cooked evenly.
3. Place the slide-in unit 1 completely in the hot air fryer.
4. Connect the power plug to a socket. All symbols in the control
panel 7 will light up briefly. The sensor-field
10 will remain active.
5. Touch the sensor-field
the appliance. The sensor-field
200°C (392°F) and the time min (15) will be shown.
If there is no further operation after switching on the appliance,
it will switch off after approximately one minute.
Manual preselection of the cooking time and temperature
Use this setting also to preheat the
hot air fryer.
Set the time to a maximum of 5
minutes.
1. Touch the sensor-field
approximately 2 seconds, to turn
on the appliance.
2. With the sensor-fields 19 and 20,
you can raise or respectively lower
the temperature.
for approximately 2 seconds, to turn on
blinks and the temperature
for
10
23
17
On/Off | Start/Stop
22
17
18
19
20
Publicidad
