HPA-Faip M 824 LL Uso Y Mantenimiento página 42

WARNING
To stop the machine in an emergency:
- disconnect the power supply plug;
- isolate the compressed air supply
network by disconnecting the (quick-
coupling) shut-off valve (fig. 7a).
WARNING
When working with the machine it is
strongly recommended not to use equi-
pment or tools not manufactured by
SIMPESFAIP.
MAIN WORKING
ELEMENTS OF THE
MACHINE
WARNING
Get to know your machine: The best
way to prevent accidents and obtain
top performance from the machine is
to ensure that all operators know how
the machine works.
Learn the function and location of all
the controls.
Carefully check that all controls on the
42
machine are working properly.
The machine must be installed prop-
erly, operated correctly and serviced
regularly in order to prevent accidents
and injuries.
1 Vertical arm drive cylinder.
2 Locking handle
• Press lever A to lower the vertical arm,
release it to raise it.
• Hold down lever A and turn handle B
to lock the vertical arm.
• Turn handle B only to release the verti-
cal arm.
3 Vertical and horizontal arm (to position
the mounting/ demounting tool).
4 "Leva la leva" (Without lever) mount-
ing/ demounting tool (for mounting and
demounting tyre onto/from rim).
5 Tilting movable column.
6 Clamp gripper (secures the rim to the
turntable).
7a
7 Turntable (rotary platform supporting
the wheel).
8 Movable column control pedal (5) (two-
position pedal for tilting the column
unit).
9 Clamp grippers (6) opening and closing
control pedal (three-position pedal for
opening/closing rim clamps).
10 Bead breaker control pedal (two-posi-
tion pedal to operate the bead breaking
shoe (13).
11 Turntable (7) rotation control pedal
(three-position pedal):
-
-
-
12 Inflation pedal (two-position pedal on
STD model, three-position pedal on TI
version, used to inflate tyre via Doyfe
connector (21)).
13 Bead breaker shoe (movable shoe to
Position 0 (stable) turntable
stationary.
Pressed downwards (self-returns
to centre when released), rotate
clockwise.
Lifted (self-returns to centre when
released), rotate anti-clockwise.
Operator's manual M 824 LL