HPA-Faip M 824 LL Uso Y Mantenimiento página 44

inflation).
WARNING
For technical characteristics, warnings,
maintenance instructions and all other
information concerning the air tank,
consult the relative usage and mainte-
nance manual provided with the machi-
ne documentation.
Danger warning decals
Risk of crushing.
Never insert body parts
between the bead
breaking shoe, rim and
rim support.
When locking the rim on
the turntable, never in-
sert your hands between
the rim and the clamp
gripper.
NEVER stand behind the
machine.
NEVER insert your hands
between the wheel and
the head when lowering
the head.
44
BEAD BREAKING
WARNING
During this operation, noise levels
assessed at 85 dB(A) may occur. The-
refore we advise operators to wear
hearing protection devices.
Deciding from which side of the
wheel the tyre must be demounted
Fig. 9
A
B
C
A Narrow side - Side for mounting the tyre.
B Rim well.
C Wheel.
D Wider side - You cannot mount tyres
from this side.
The two sides may be almost identical,
but only the narrow side serves for
tyre mounting and demounting.
Identify the side for tyre mounting and make
sure that this side is facing upward when you
install the tyre on the table top (i.e. facing
toward the mount/demount head).
Special instructions
Alloy wheels
Some alloy wheels on the market have
minimal rim wells or are even completely
without rim wells (these wheels are not
DOT approved).
Fig.9a
Operator's manual M 824 LL
D
9