HPA-Faip M 824 LL Uso Y Mantenimiento página 53

Operator's manual M 824 LL
WARNING
Always check that the tyre size is
compatible with the rim size before
mounting.
- Ensure that the tyre is in good condi-
tion and undamaged, then lubricate the
beads (see chapter relative to soft-walled
tyres).
- Place the tyre over the wheel and tilt the
tower forward.
- Mount the lower bead, proceeding as
29
described for soft-walled tyres.
Proceed as follows to mount the upper
bead:
- Use the disc (HELP) to create a gap
large enough to first insert the edge
guard and then fit the clamp onto the
edge guard itself (see Fig. 31).
30
- Turn the turntable clockwise until the
upper bead is completely mounted.
NOTE: Ensure that the bead passes over
the tail of the head.
- Tilt the column backwards, release
the wheel and remove it from the tyre
changer.
Mounting
31
EN
53