Troubleshooting
Problem
The oven is not
clean after a
self-cleaning
cycle.
There is steam
or smoke coming
from under the
control panel.
A burning or
oily odor coming
from the vent.
Strong odor.
The oven racks
are difficult to
slide.
Fan noise.
The convection
fan is not
working.
100
English
DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 100
DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 100
Cause
A fine dust or ash is normal.
This is normal.
This is normal for a new oven
and will disappear within
hour of the first bake cycle.
This is temporary.
This is normal.
This is normal.
This is normal.
Action
This can be wiped clean with a
damp cloth.
Set the self-cleaning cycle for a
longer cleaning time.
The cycle was not long enough
to burn off the dirt buildup.
Extremely dirty ovens require
hand-cleaning of excessive
spillovers and food buildup
before you start a self-cleaning
cycle. Multiple self-cleaning
cycles may be necessary to
completely clean the oven.
The oven vent is located there.
More steam is visible when
you are using the convection
functions or when baking or
roasting multiple items at the
same time.
To speed the process, set a self-
/
cleaning cycle for a minimum of
1
2
3 hours. (See page 60.)
The insulation around the inside
of the oven emits an odor the
first few times the oven is used.
Apply a small amount of
vegetable oil to a paper towel,
and then wipe the edges of the
oven racks with the paper towel.
Racks become dull and hard to
slide if they are left in the oven
during a self-clean cycle.
The convection fan runs until
the function is over or the door
is opened.
The fan starts automatically
when the oven reaches the
preheat temperature.
2023-01-12 오후 2:41:25
2023-01-12 오후 2:41:25