Dacor Pro DOP30 840 Serie Manual De Instrucciones página 102

Troubleshooting
Information codes
Oven
Displayed
code
C-d0
C-d1
C-F0
C-F2
C-20
C-21
C-22
102 English
DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 102 DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 102
Possible cause
This code occurs if the control key is
short for 1 minute.
This code occurs if the door lock is
mispositioned.
This code occurs if communication
between the Main and Sub PBA is
interrupted.
This code occurs if communication
between the Main and Touch is
interrupted.
The oven sensor is open when the
oven is operating.
The oven sensor is short when the
oven is operating.
This code occurs if the internal
temperature rises abnormally high.
The Sub PCB sensor is open when
the oven is operating.
The Sub PCB sensor is short when
the oven is operating.
Solution
Clean the buttons and make sure
there is no water on/around
them. Turn off the oven and try
again. If the problem continues,
contact a local Dacor service
center.
Turn the burner knob to Off,
and then restart the oven. If the
problem persists, disconnect all
power to the oven for at least
30 seconds and then reconnect
the power. If this does not solve
the problem, call for service.
Restart the appliance.
Turn both the mode and
temperature selector knobs to
Off, and then restart the oven. If
the problem persists, disconnect
all power to the oven for at least
30 seconds and then reconnect
the power. If this does not solve
the problem, call for service.
2023-01-12 오후 2:41:25 2023-01-12 오후 2:41:25