Dacor Pro DOP30 840 Serie Manual De Instrucciones página 85

To lubricate the slides of the gliding rack
DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 85 DOP30T840GS_DG68-01458A-00_EN+MES+CFR.indb 85
1. Remove the rack from the oven. See
removing the gliding rack in the Using
the gliding rack section on page 43.
2. Fully extend the rack on a table or
countertop. Newspaper may be placed
underneath the rack for easy cleanup.
3. If there is debris in the slide tracks,
wipe it away using a paper towel. (Any
graphite lubricant wiped away must be
replaced - See steps 4 through 7.)
4. Shake the graphite lubricant before
opening it. Starting with the left (front
and back) slide mechanism of the rack,
place four (4) small drops of lubricant
on the two (2) bottom tracks of the
slide close to the bearing carriers.
English 85
2023-01-12 오후 2:41:23 2023-01-12 오후 2:41:23