Publicidad
Idiomas disponibles
Idiomas disponibles
2. General safety rules
electric shock ifyour body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water enter-
c)
ing a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling
or unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords increase the risk of electric shock.
e)
When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sens e
when operating a power tool. Do not use a power tool while you are
moment of inattention while operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always wear eye protect-
ion. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal injuries.
c)
position before connecting to power source and /or battery pack,
picking up or carrying the tool.
the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep
your hair and clothing away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
140
FR
ES
PT
IT
PL
UA
RO
GR
EN
A
Publicidad
