Publicidad
Idiomas disponibles
Idiomas disponibles
FR
3. Additional safety regulations
ES
a) Secure the workpiece. A workpiece clamped with clamping devices or
PT
in a vice is held more secure than by hand
b) Do not work materials containing asbestos. Asbestos is considered
IT
carcinogenic.
c)
PL
placing it down. The tool insert can jam and lead to loss of control over the
power tool.
UA
d) Do not use a power tool with a damaged power cord. Do not touch
the damaged cord and pull the power plug when the cord is damaged
RO
while working. Damaged cords increase the risk of an electric shock.
e) Connect power tools that are used in the open via a ground fault
GR
circuit interrupter.
f)
EN
rial being cut. Contact with the saw blade may result in injury.
g) Guide the tool against the workpiece only when it is switched on.
Otherwise there may be danger of kickback when the tool insert jams in the
workpiece.
h) While sawing, pay attention that the pivoting Saw shoe always
faces against the work. The saw blade can become wedged and lead to loss
of control over the power tool.
i)
has come to a stop before pulling it out of the cut. This avoids kickback and
the tool can be placed down securely.
j) Use only undamaged blades that are in proper condition. Bent or dull
saw blades can break or cause kickback.
k) Properly clamp the material to cut. Do not support the workpiece
with your band or foot. Avoid touching any objects or the ground with
the running saw blade. Danger of kickback.
l) Use appropriate detectors to determine if utility lines are hidden in
the work area or call the local utility company for assistance. Contact with
explosion. Penetrating a water line causes property damage or may cause an
electric shock.
m)
Always wait until the tool has come to a complete stop before
Keep hands away from the cutting area. Do not reach under the mate-
143
sideward
Publicidad
