Infiniton BLACK IS BACK Serie Manual De Instrucciones página 89

How to use
English
15. ELE.H / ECO. This button has two functions:
A. ELE.H
* Pressing this button in HEAT mode will activate/deactivate the electric heating.
B. ECO
* If this button is pressed in COOL mode, the unit will enter the ECO mode which has the lowest power
consumption and will automatically deactivate after 8 hours.
* Changing modes or turning off the remote controller will automatically cancel the ECO function.
* Press the ECO button in ECO mode to exit ECO mode.
Note: ECO mode only works with inverter units.
Insert the batteries into the remote control
1. Slide the cover open in the direction indicated by the arrowhead. 2.
2. Insert two new batteries and insert the batteries into the correct electrical terminals (+ and -).
3. Replace the cover.
Automatic operation
1. Press the "MODE" button, select the automatic operation mode.
2. By pressing the "SPEED" button, you can select the fan speed between LOW, MEDIUM, HIGH, AUTO.
3. Press "ON/OFF" button, the air conditioner will start working.
4. Press the "ON/OFF" button again, the air conditioner stops.
In fan operation mode, the temperature settings are not effective.
Cooling/Heating Mode
1. Press the "MODE" button, select cooling or heating operation mode.
2. By pressing the "UP" or "DOWN" button, you can adjust the temperature, the display changes by tou-
ching the button.
3. By pressing the "SPEED" button, you can select the fan speed between LOW, MEDIUM, HIGH, AUTOMATIC.
4. Press "ON/OFF" button, the air conditioner will start working.
5. Press the "ON/OFF" button again, the air conditioner will stop.
Fan mode
1. Press the "MODE" button, select the fan operation mode.
2. By pressing the "SPEED" button, you can select the fan speed from LOW, MEDIUM, HIGH.
3. Press the "ON/OFF" button, the air conditioner will start working.
4. Press the "ON/OFF" button again, the air conditioner stops.
Note: In fan operation mode, the temperature cannot be set.
Dehumidifier Mode
1. Press the "MODE" button, select the dehumidifying operation mode.
2. By pressing the "UP" or "DOWN" button, you can adjust the temperature, the display changes by tou-
ching the button.
3. By pressing the "SPEED" button, you can select the fan speed from LOW, MEDIUM, HIGH, AUTO.
4. Press "ON/OFF" button, the air conditioner will start working.
5. Press the "ON/OFF" button again, the air conditioner will stop.
LCD illumination
The remote controller has a backlight that can be turned on by pressing any button for the convenience
of operating in the dark. The backlight will automatically turn off if no operation is performed within 10
seconds.
89
infiniton.es