SMA SUNNY TRIPOWER CORE1-US Instrucciones De Instalación página 19

SMA Solar Technology AG
SMA Webconnect
The inverter is equipped with a Webconnect function as standard. The Webconnect function
enables direct data transmission between the inverter and Sunny Portal without any additional
communication device and for a maximum of 4 inverters per visualized system. In PV systems with
more than 4 inverters, there is the option of establishing data transmission between the inverters
and Sunny Portal via the data logger (e.g., SMA Data Manager) or distributing the inverters over
several systems. You can directly access your visualized system via the web browser on your end
device.
Wi-Fi
Depending on availability, the product is or is not equipped with a Wi-Fi interface. If the Wi-Fi
interface is present, the Wi-Fi interface is enabled by default at delivery. If you do not want to use
WLAN, you can deactivate the WLAN interface.
If the Wi-Fi interface is present, the product also has a WPS function. The WPS function is for
automatically connecting the product to a network (e.g. via router) and establish a direct
connection between the product and a smart end device.
Expanding the radio range in the WLAN network
In order to expand the radio range of the inverter in the WLAN network, you can install the
Antenna Extension Kit accessory set in the inverter.
Modbus
The product is equipped with a Modbus interface. The Modbus interface is deactivated by default
and must be configured as needed.
The Modbus interface of the supported SMA products is designed for industrial use – via SCADA
systems, for example – and has the following tasks:
• Remote query of measured values
• Remote setting of operating parameters
• Setpoint specifications for system control
Module slots
The inverter is standard-equipped with two module slots. The module slots are located on the
communication assembly and allow additional modules to be connected (e.g. SMA Sensor
Module). The modules are available as accessories. The installation of two identical modules is not
permissible.
SMA RS485 Module
With the assembly of the RS485 Module, the inverter can communicate with special
SMA communication products (Information on assembly and connection see manual of the SMA
RS485 Module). The SMA RS485 Module can be retrofitted.
Antenna Extension Kit
Within the WLAN network, the Antenna Extension Kit enables the radio range of the inverter to be
upgraded (Information on assembly and connection see manual of the Antenna Extension Kit). The
Antenna Extension Kit can be retrofitted.
Installation Manual
4 Product Overview
STP33-62-US-41-IA-xx-14 19