Publicidad
Idiomas disponibles
Idiomas disponibles
6. Operation
WARNING!
ous injury.Advance the tool very slowly when cutting curves or scrolling.
Forcing the tool may cause a slanted cutting surface and blade breakage.
Turn the tool on without the blade making any contact and wait until the blade
move the tool forward along the previously marked line.
1) Pocket & round cutting
When starting a cut from the center of a work piece, drill a 12mm diameter hole
to ensure that there is clearance for the blade.
a) When cutting tight curves, reduce the speed of the saw.
WARNING!
comes to rest on its surface.
2) Cutting metal
a) When cutting metals, suitable cooling/cutting oil must be used.
b) Squirt the lubricant onto the blade or work piece at regular intervals during
cutting in order to reduce wear on the blade.
Dust Extraction
3)
a) The circular saw is equipped with a dust extraction port, Can connect to
Dexter vacuum 35mm aperture.
ure to do so may cause blade breakage, resulting in a seri-
Do not move the saw forward along its cut until the blade
has completely entered the material and the base plate
139
FR
ES
PT
-
IT
PL
UA
RO
GR
EN
Publicidad
