Publicidad
Idiomas disponibles
Idiomas disponibles
7. Maintenance
WARNING!
1. Replace the saw blade according to which material to cut, as soon as its teeth are
blunt and proper sawing is therefore no longer possible.
2.Clean the appliance after completing your sawing work.
3. Remove any dirt (e.g. sawdust). If necessary, clean the saw blade mounting with a
brush or blow it out with compressed air
8. Troble Shooting
Problem
Product does not start
Product does not reach
full power
Unsatisfactory result
9. Disposal and recycling
Meaning of crossed –out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact your local government for informa-
tion regarding the collection systems available. If electrical appliances are
water and get into the food chain, damaging your health and well-being.
Please read "WARNING" or previous section regarding
checking and changing of the SAW BLADE.
Possible cause
Not connected to power supply
Power cord or plug is defective
Other electrical defect to the
product
Extension cord not suitable for
operation with this product
Power source(e.g.generator)has
too low voltage
Air vents are blocked
Blade is worn
Solution
Connect to power supply
Check by a specialist
electrician
Check by a specialist
electrician
Use a proper extension
cord
Connect to another power
source
Clean the air vents
Replace with new blade
141
FR
ES
PT
IT
PL
UA
RO
GR
EN
-
Publicidad
