EFFEKTIV TRIUMPHATOR 2000X Manual De Usuario página 17

32
4. Open the looper cover and clean
the looper and surrounding area
with the cleaning brush.
5. Replace the needle plate, needles
and presser foot.
Close the looper cover.
EN USER MANUAL
Problem
Needle Thread breaks
Needle bends or breaks
Skipped stitches
Seam puckering
Machine does not operate
TRIUMPHATOR 2000X
Cause
The machine is not threaded correctly See pages 15-20
The thread tension is too tight See pages 20, 24-27
The needle is bent or blunt See page 12-13
The needle is not set correctly See page 12-13
A wrong needle is used See page 12-13
The needle is bent or blunt See page 12-13
The needle is not set correctly See page 12-13
The needle clamp screw is loose See page 12-13
The fabric is forcedly pulled Do not pull the fabric
The needle is not set correctly See page 12-13
The needle is bent or blunt See page 12-13
The tension is out of balance See pages 16, 19, 20
The machine is not threaded correctly See pages 15-20
The tension is out of balance See pages 20, 24-27
The machine is not connected to the See page 7
power supply
The foot control is not plugged in See page 7
firmly
Reference
33