Corghi ProLine 60 Manual De Uso página 34

1. PREFACE
WARNING
There will be of warranty period on the condition
that the machine including the operation system,
tools and accessories are used properly and/or
without damage. During this period, the manu-
facturer will repair or replace the parts returned
or the machine itself, sustaining the costs but
not accepting responsibility for normal wear and
tear, incorrect use or transportation, or failure to
carry out main¬tenance. The manufacturer will
not inform the customer about any improve-
ments to the products or the upgrading of the
production line.
INTRODUCTION
The purpose of this manual is to provide the
owner and operator of this machine with a set
of safe and practical instructions for the use and
maintenance of the wheel balancer.
If such instructions are carefully followed, the
machine will offer you the levels of efficiency
and duration.
The following paragraphs define the levels of
danger regarding the machine.
DANGER
Refers to immediate danger with the risk of
serious injury or death.
WARNING
Dangers or unsafe procedures that can cause
serious injury or death.
ATTENTION
Dangers or unsafe procedures that can cause
minor injuries or damage to property.
Read these instructions carefully before using
the machine. Keep this manual and the illustra-
ted materials supplied with the equipment in a
folder near the place of operation so as to allow
the machine operators to consult the documen-
tation at any time.
34
The manual is only to be considered valid for the
machine serial number and model stated on the
attached nameplate.
The instructions and information described in
this manual must always be complied with: the
operator will be held responsible for any ope-
ration not specially described and authorized
in this manual.
Some of the illustrations contained in this booklet
have been taken from pictures of prototypes:
standard production machines may differ slightly
in certain respects. These instructions are for the
attention of personnel with basic mechanical
skills. We have there¬fore condensed the de-
scriptions of each operation by omitting detailed
instructions regarding, for example, how to loosen
or tighten the fixing devices. Do not attempt to
perform operations unless properly qualified or
with suitable experience. If necessary, please con-
tact an authorized Service Centre for assistance.
ProLine 60 - Operator's Manual