Schaeffler MF-Generator-3.0-10kW Manual Del Usuario página 14

After entering the password, the "set up" screen appears in a
clear view in which all settings are released and can be set as
described further in the manual.
After making the desired settings, the "Lock" button
be pressed to restrict the setting options for unauthorized
persons again.
After pressing the "Lock" button, it changes back to "Unlock" and
the unavailable functionality is displayed more blurred again.
9. Heating
9.1 Heating modes
The MF-GENERATOR-3.0 has four heating modes.
These can be selected by pressing the current mode in the
settings screen.
14
A selection menu appears on the right-hand side in which one of
the four heating modes can be selected by pressing. The selection
made is then displayed under "Mode" and the selection menu
disappears from the screen again. More, less or other variable
parameters may be displayed, depending on the choice made.
must
Example screen after selecting "Temp & Speed".
The generator remembers which heating mode with which
settings was last used. The generator returns to this mode and
these settings the next time it is used or when it is started again.
If required, press "Default"
the generator as set in the settings menu.
The heating modes
Temperature mode
Heating of workpieces to a set temperature; the temperature
of the workpiece is monitored during the whole process. In the
settings menu, it is possible to select a double measurement / ΔT
measurement here. T1 (temperature sensor 1) is the main sensor
here and is the master for the heating process.
In this mode, one or more temperature sensors have to be used
that are positioned on the workpiece to be heated.
Time mode
Heating of workpieces over time. The heating process is performed
for a set time. The workpiece temperature is not measured or
checked. This mode can be used when you know in advance how
long it takes to heat a given workpiece to a given temperature.
This is the only mode in which the generator can function without
temperature sensors being connected.
to call up the default settings of
Schaeffler Technologies