Sammic AT-3 Manual De Instrucciones página 59

HACCP alarms
3.5
Access the SETTINGS menu with the
alarms stored. If there are no HACCP alarms stored, the display will show the words "NO ALARM".
The following HACCP alarms are listed:
- Blast chilling/blast freezing cycle duration
- Power failure
- Door open
- High temperature alarm
- Low temperature alarm
The time of their appearance will only be shown if an RTC is installed.
Restore data
3.6
Access the SETTINGS menu with the
PARAMETERS sub-menu can be accessed by first typing the password 149.
Real time clock
3.7
On the REAL-TIME CLOCK page, if the
can be set by using the
procedure to complete the changes. Once the date and time have been set, you will be returned to the previous menu
after 50 seconds of inactivity or by pressing the
key, select HACCP ALARMS and press
key, select RESTORE DATA and press
key is pressed, the 2 digits indicating the year start to flash. The value
keys, and then confirmed by pressing the
key.
6
to see the last 9 HACCP
. The RESTORE
key. Continue using this
EN