Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
EXHAUSTING HOT AIR
In the Cool Mode the appliance must be placed close to a window or opening so that the warm exhaust
air can be ducted outside.
First position unit on a flat floor and make sure there's a minimum of 18"(45cm) clearance around the
unit,and is within the vicinity of a single circuit outlet power source.
1 .Extend either side of the hose (Fig.1)and screw
the hose inlet (Fig.2).
2 .Extend the other side of the hose and screw it to the hose outlet (Fig.3).
3 .Install the hose inlet into the unit (Fig.4).
4 .Affix the hose outlet into the window slider kit and seal. (Fig.5 &6).
126
Publicidad
