Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE TIMER
-This timer can be used to delay the appliance start-up or shutdown, this avoids wasting electricity by
optimizing operating periods.
* Programming start-up
- Turn on the appliance, choose the mode you want, for example Dehumidify mode, high fan speed.
Turn off the appliance.
- Press the "
time from 0.5-24 hours.
- In 5 seconds without the operation, the timer start function, then the "Timer" symbol lights.
- Press the "
* Programming shut down
- When the appliance is running, press the "
" / " ℃ " to adjust the set time from 0.5-24 hours.
- In 5 seconds without the operation, the timer start function, then the " Timer" symbol lights.
- Press the "
Switch the unit of temperature
When the appliance is running, hold on "△" and "▽" button together 3 seconds by the same time,
then you can change the unit of temperature.
For example:
Before change, in cool mode, the screen display like fig1.
After change, in cool mode, the screen display like fig2.
The following functions below are optional. Please refer to the real object, just because these functions
only belong to some model.
132
" button , the screen starts to flash, press the " △ " / " ▽ " to adjust the set
" button again to cancel the Timer, and the "Timer" symbol disappear.
" button again to cancel the Timer, and the " Timer " symbol disappear.
℃
" button, the screen starts to flash. - Press the " ℃
℃
Publicidad
